Fine Jewelry Authentication Specialist
Fine jewelry authentication specialist. Focuses on hallmarks, stone setting, and metal finishing.
Published November 2026 · Contact
Why HardWear Is Checked at the Clasp
Tiffany HardWear was introduced in 2017, designed around the hardware of New York: chunky links with ball-ended bars that read like industrial fittings. In resale it turns up in two forms. The link pieces (bracelets and necklaces in graduated or uniform links) are the signature HardWear look. The ball bracelets and necklaces, a strand of polished sterling beads with a lobster clasp and a small round tag, are sold under the HardWear name too and are far more common in our archive.
Both forms put their marks in the same place: at the clasp. On the link pieces the signature, metal mark and "ITALY" are engraved along one bar of the clasp link; on the ball pieces they are split between the round tag and the lobster clasp. This guide shows what those marks look like on genuine pieces. For general Tiffany chain and clasp checks see the general Tiffany jewelry guide, and for the heart and oval tags see the Return to Tiffany guide.
Worth knowing
This guide is built from genuine HardWear pieces in our own order archive. We also went through the fake-graded ball bracelets, but the marks on them did not differ from the genuine ones in a way that repeated, and we did not find enough fake link pieces to compare. So there is no ranked fake-tells table here. Use it to learn what genuine marks and construction look like.

The Link Pieces: Shape and Construction
Each HardWear link is a long rounded U closed by a straight bar, and the bar ends in a pair of balls on each side, so the link looks like a shackle. On genuine pieces the balls are round, smooth and set tight against the bar, the U is an even thickness all the way round, and the polish carries into the joins without pits or seams.

The clasp is one of the links. On the genuine pieces we examined it opens at the bar: one end of the U slides into a sleeve beside the balls. The fit is close and the parts line up when it is shut.

The Engraved Line on the Links
On the genuine link pieces we examined, the clasp link carries one engraved line with the signature, the silver mark and the country. We saw two forms of it on authenticated pieces:
- "©Tiffany & Co. Ag925 ITALY", in a serif face with lower-case "iffany" and "Co.", on the straight bar of the clasp.
- "©T&Co. AG925 ITALY", the short form, along the curve of the link.


Both forms are genuine, so the short or long signature on its own tells you nothing. What to look for is a clean, even line: letters of one height, cut to the same depth, following the curve of the metal without wandering. Gold HardWear pieces carry a gold mark in place of Ag925.
Worth knowing
We did not find a year stamp on the genuine link pieces we reviewed. Do not reject a piece because it has no date, and do not take a date as proof of anything.
The Ball Pieces: Round Tag and Clasp
The HardWear ball bracelets and necklaces close with a lobster clasp, with a small round tag on a jump ring beside it. On the genuine pieces we examined the tag is stamped on both sides: "©TIFFANY & Co." around the edge on one side, and "925" (or on some tags "AG925") in the middle of the other. The lobster clasp carries its own "925" on the side.


The beads themselves are unmarked. On genuine pieces they are evenly sized (or evenly graduated on the graduated necklace), polished all round, and threaded so they sit close without gaps.
Worth knowing
The fake-graded ball bracelets we reviewed often carried a round tag and a lobster clasp that looked right in a normal photo. A correct tag is a reason to keep checking, not a verdict.
General Red Flags Across the HardWear Market
These are widely reported in the resale market rather than shown by our photos, so treat them as prompts to look closer:
- Plating wearing through to a different metal underneath. Sterling silver tarnishes, which is normal, but solid silver has no other metal beneath the surface.
- Light weight for the size. HardWear link pieces are heavy for their length; a piece that feels light in the hand is worth weighing.
- Loose or rattling clasps, or balls that are not round or sit at an angle.
- Rough or uneven engraving, or a line that wanders off the curve of the link.
What a Matching Mark Does and Does Not Prove
A correct engraved line or a correct round tag proves the piece copies Tiffany's marks well. It does not prove the piece is genuine, because fakes copy these marks. The marks matter most when something about them is wrong: a wrong metal mark, a misspelled signature, letters of uneven height. Weight and how the clasp feels are checks done with the piece in hand. Packaging, pouches and boxes are context only.
When to Get a Professional Opinion
A sterling HardWear link bracelet sells for several hundred dollars and more, and gold pieces for far more. If a piece passes the checks above and the price matters, a professional review against verified pieces is the reliable next step. Our authentication service looks at the engraving, the clasp, the construction of the links and the finish, and returns a verdict with a Certificate of Authenticity.
A code that checks out doesn't prove the item is real. Counterfeiters copy genuine codes.
Our authenticators check the hallmarks, engravings, clasp and settings of your Tiffany & Co. against verified references, from $30. You get a verdict within 24 hours, and a Certificate of Authenticity if the item passes.
Authenticate My Tiffany & Co. →FAQ
Where is the stamp on a Tiffany HardWear bracelet?
On the link pieces, along one bar or curve of the clasp link, as a single line such as "©Tiffany & Co. Ag925 ITALY" or "©T&Co. AG925 ITALY". On the ball bracelets, on the round tag by the clasp (©TIFFANY & Co. on one side, 925 on the other) and on the side of the lobster clasp.
Is "T&Co." or "Tiffany & Co." correct on HardWear?
Both. We have seen both forms on authenticated HardWear link pieces, so the length of the signature is not a test on its own.
Does Tiffany HardWear have a year stamp?
We did not find one on the genuine HardWear pieces we reviewed. A date is not needed to pass and does not prove anything if present.
Is the Tiffany ball bracelet part of HardWear?
Yes. Tiffany sells sterling silver ball bracelets and necklaces under the HardWear name, alongside the link pieces. They close with a lobster clasp and a round tag.
Can I authenticate Tiffany HardWear from photos?
Yes. Clear close-ups of the engraved line or round tag, the clasp, and the whole piece show the marks and the construction, and those are what decide it when compared against verified pieces. On an expensive piece a professional review is the safer route.
Does a blue box or pouch prove HardWear is real?
No. Packaging is easy to buy separately and is context only.
Sources
Photos are from LuxeDetect's own order records, and the genuine marks described here were checked on authenticated pieces in them. The collection's 2017 introduction and its link and ball pieces are from Tiffany & Co.'s own collection pages (tiffany.com).





